With this solution the B-component packaging is in fact the lid of the A-component packaging. This means that the B-component always has to be filled first, because it’s function is to seal the A-component. The end-user punctures the bottom of the B-component and the content runs into the A-component packaging, after this the components can be mixed. A large advantage of this system is that the B-component packaging fills the empty space in the A-component packaging. In view of transport this is an important advantage. Some customers will appreciate the efficiency of not having to pour the B-component into the A-component.
When one wants to add a part of the B-component to the A-component this can be done by pouring from the plastic closure (in flat cap B-component packaging) The disadvantage of this is, that the bottom of the B-component packaging will always be soiled and that the emptying time can be lengthy with viscose fillings (emptying through a puncture hole). The standard version is the white-lacquered exterior. The integrated 2-component tin can packaging has a large range of capacity measures.
Specifications
Integrated duo component packaging, Ø 118 mm
- A-component: capacity up to 1,5 litre
- B-component: capacity 200 ml up to 500 ml
- UN approval possible
- A-component without handle
- Internal coating possible
- Closure: manual latch ring lid or mechanical
- Offset printing possible on A-component
- Offset printing possible on flat cap of B-component
- A-component volledig te ledigen
- B-component te ledigen middels doorprikken of uit dopgat gieten
Integrated duo component packaging, Ø 158 mm
- A-component: capacity 3 and 4 litre
- B-component: capacity 500 ml up to 900 ml
- UN approval possible
- A-component with handle
- Internal coating possible
- Closure: manual latch ring lid or mechanical
- Offset printing possible on A-component
- Offset printing possible on flat cap of B-component
- A-component volledig te ledigen
- B-component te ledigen middels doorprikken of uit dopgat gieten
Integrated duo component packaging, Ø 235 mm
- A-component: capacity 5 up to 12 litre
- B-component: capacity 1,3 up to 2,5 litre,
3 up to 4 litre for 10 and 12 litre A-component - UN approval possible
- A-component with handle
- B-component with handle
- Internal coating possible
- Closure: manual latch ring lid or mechanical
- Offset printing possible on A-component
- Offset printing possible on flat cap of B-component
- A-component volledig te ledigen
- B-component te ledigen middels doorprikken of uit dopgat gieten
Integrated duo component packaging, Ø 325 mm
- A-component: capacity 20 and 25 litre
- B-component: capacity 2 up to 6 litre
- UN approval possible
- A-component with handle
- B-component with handle
- Internal coating possible
- Closure: manual latch ring lid or mechanical
- Offset printing possible on A-component
- Offset printing possible on flat cap of B-component
- A-komponent volledig te ledigen
- B-komponent te ledigen middels doorprikken of uit dopgat gieten
Terminology
Without exception the largest measure of capacity will be indicated as the A-component. This will be closed with a lid. The B-component can be closed with either a lid (latchring) or a plastic closure.
